SeaSucker Cup Holder - Vacuum Mount - White - 4 Cups - Horizontal

Video Transcript for Review of SeaSucker Marine Boat Accessories - 4 cup holder vacuum mount - SS37FR

Hello, neighbor and welcome back. This is Steven with etrailer.com. Today we're gonna be taking a look at the SeaSucker four-cup cup holder, vacuum mounted. Now this is a perfect addition for your marine application. It does hold four cups or bottles or cans, whatever you wanna use. It has four compartments that easily pop out.

They're all tapered for different sizes, so they should easily fit your bottle, cup or can as needed. Now it does come with a very strong and durable 4 1/2 inch vacuum seal here. They also included a hard plastic vacuum seal cover. So when you're not using this, you can cover the seal, keep it clean from debris, keep it lasting long. That way it'll last you for a long time and be clean for you.

It's made from a durable plastic. It's white. It's made in the good old USA. And I took some measurements of this earlier, but I wanna try to show you some different measurements here. Overall from side to side, it's about 13 inches.

I know this particular ruler doesn't go quite that far. That's about 13 inches. And then also the up and down, it's about nine inches. Now, when it's mounted onto your flat, clean surface, the depth here from the suction out to the the farthest top of the cup holder, it's about 3 3/4 inches, give or take. Now, this does mount to a clean, smooth surface.

So again, you wanna make sure the surface is clean and smooth. It also comes with this orange indicator. And it's got this pump, and that's what you're gonna use to pump out the air or vacuum it to your smooth surface. I've got a little piece of plastic here. Let's see if I can show that to you pretty good. You're just gonna mount it flat on your wall, obviously of the boat or whatever, and you're just gonna keep pumping this. And that's gonna pump out all the air. (pump clacking) And you're gonna keep pumping until you get rid of all of that orange. All right, so we still got a little bit of orange there. Okay, there we go. Alright, so once all the orange is gone, that sucker's mounted, it is rated for 120 pounds pulling. So again, that's 120 pounds of force to actually get that to break off. Now, when you're not using it and you wanna keep it stored or clean, there's a rubber tap here and there's also one on the back that you can't see 'cause it's suctioned down right now. But you just lift up on that and that's gonna release the vacuum. Now in this particular unit, it is a little hard to reach the back one here without taking out the cup holders. And again, it's a really strong hold. So that's what you want. You want it to hold. And as you can see, it's holding pretty good. There we go. All right, so we're gonna put our cup holders back in here. But yeah, that's gonna give you a really, really strong hold. Like I said, this will work for all your cups, cans, bottles, whatever you need. Again, that's Steven with etrailer.com. This is our look at the four-cup cup holder by SeaSucker. Thank you for joining us. We'll see you next time.